Tapmaster - Kick Plate Model 1751 Combination Kick and Cabinet Door Activator
Combine the ease of our cabinet door models with the versatility of our kick pedals.
The Model 1751 gives you the best of both worlds by combining our cabinet door & kick plate activators in one solution by allowing you to use your knee or your foot to activate water flow. This model also allows you to use the kick plate to lock the water flow on when filling large containers or your sink by pressing down on the angled face until it latches. This will provide continuous flow to the faucet until the kick plate is tapped again to unlatch. It should be noted that with the kick plate locked on, your faucet behaves exactly as it did before the Tapmaster® was installed. As one of our most versatile units, it may also be installed in unique situations such as island cabinetry where having the ability to activate the faucet from both sides of the cabinet is important.
In-line valve blocks are precision machined, chrome plated solid brass, featuring smooth shut off, crossflow prevention, as well as main water flow screening and control circuit filtration.
|Pressure||Operating||0 to 125 psi (862 kpa) maximum|
|Static Burst Rating||700 psi (4,830 kpa) for complete assembly|
|Flow||Both Valve Blocks||7.2 gpm @ 60 psi (27.01/m @ 4 bar)|
|Connections – Valve Blocks||Inlet||Integrated 3/8" compression nut "O" ring seal|
|Outlet||Nut and sleeve, 3/8" compression|
|Filtration||Control Circuit||25 micron|
|Main Port||Greater than .060" (1.5 mm)|
|Construction||Valve Bodies||Chrome plated brass|
|Seals||Silicone or E.P.D.M.|
|Control Tubing||1/8" O.D. 3 tube bundle (high density polyurethane)|
|Kick Plate (1740 & 1750 Series)||18g #4 brushed stainless steel top, aluminum base|
|Foot Pedal (1760 Series)||18g #4 brushed stainless steel|
|Euro (1770 Series)||Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe|
|Floor Activators (1780 Series)||304 stainless steel laminate, polyurethane buttons, stainless steel hardware|
|Dimensions||Valve Block (less tube fittings)||2.5" x .88" x 1.25" (6.35 x 2.24 x 3.18 cm)|
|Button Valve Fittings||.63" x .63" x 1.0" (1.60 x 1.60 x 2.54 cm)|
|Kick Plate (1740 & 1750 Series)||8.0"w x 3.42"h x 1.14"d (20.32 x 8.64 x 2.90 cm)|
|Floor Foot Pedal (1760 Series)||7.1"w x 3.0"h x 1.1"d (18 x 7.6 x 2.8 cm)|
|Euro (1770 Series)||1.19"w x 4.92"h x 1.37"d (3.0 x 12.5 x 3.5 cm)|
|Floor Activators (1780 Series)||5.65" diameter disc (14.35 cm)|