Midmark M9 UltraClave With Automatic Door
(Discount shown during checkout)
Midmark M9 Autoclave Automatic Sterilizer
Door automatically opens after the cycle completion
The Midmark M9 Autoclave Automatic Sterilizer offers easy, effective sterilization with the convenience of a door that opens automatically. One button starts the cycle and the door automatically opens after the cycle completion.
Convenience at a glance.
The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode and dry mode, the remaining cycle time is displayed as well as temperature and pressure.
No more wet instruments.
Once the sterilization is complete, the door opens automatically and quietly to dissipate steam and dry your instruments. You'll have dry, sterile instruments every time.
If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization can't continue until you've attended to the unit.
Ease of draining & filling.
For ease of draining and filling, the Midmark M9's reservoir fill port and drain tube is in the front of the unit, not on top or in back.
Self Program Controls
Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275˚F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired.
Four pre-programmed sterilization cycle controls: Unwrapped (132o C or 270o F for 3 minutes), Pouched (132o C or 270o F for 5 minutes), Packs (121o C or 250o F for 30 minutes), Handpiece (unwrapped and pouched) (132˚ C or 270˚ F for 6 minutes).