Model 1751 Tapmaster Kick Pedal - Single Water Line
Product Information:
- Products Model: 1751
- Product Brand: Tapmaster, Inc.
- Condition: New
- Warranty: 5 Years
Product images shown are for illustration purposes only and may not be an exact representation of the product. If you have questions regarding product images click here. The shipping cost provided is an estimate. Actual shipping and handling costs may vary based on the destination, logistics, supply chain challenges, and other shipment requirements. The actual shipping cost will be added to the final invoice.
DO NOT USE, this is for kick plate model only, will not come with cabinet activator, use 1758 to get both or 1750 for kick plate
Combine the ease of our cabinet door models with the versatility of our kick pedals.
The Model 1751 gives you kick plate activator to use your foot to activate water flow. This model also allows you to use the kick plate to lock the water flow on when filling large containers or your sink by pressing down on the angled face until it latches. This will provide continuous flow to the faucet until the kick plate is tapped again to unlatch. It should be noted that with the kick plate locked on, your faucet behaves exactly as it did before the Tapmaster® was installed. As one of our most versatile units, it may also be installed in unique situations such as island cabinetry where having the ability to activate the faucet from both sides of the cabinet is important.
In-line valve blocks are precision machined, chrome plated solid brass, featuring smooth shut off, crossflow prevention, as well as main water flow screening and control circuit filtration.
Specifications
| Pressure | Operating | 0 to 125 psi (862 kpa) maximum |
| Static Burst Rating | 700 psi (4,830 kpa) for complete assembly | |
| Flow | Both Valve Blocks | 7.2 gpm @ 60 psi (27.01/m @ 4 bar) |
| Connections – Valve Blocks | Inlet | Integrated 3/8" compression nut "O" ring seal |
| Outlet | Nut and sleeve, 3/8" compression | |
| Filtration | Control Circuit | 25 micron |
| Main Port | Greater than .060" (1.5 mm) | |
| Construction | Valve Bodies | Chrome plated brass |
| Seals | Silicone or E.P.D.M. | |
| Control Tubing | 1/8" O.D. 3 tube bundle (high density polyurethane) | |
| Kick Plate (1740 & 1750 Series) | 18g #4 brushed stainless steel top, aluminum base | |
| Foot Pedal (1760 Series) | 18g #4 brushed stainless steel | |
| Euro (1770 Series) | Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe | |
| Floor Activators (1780 Series) | 304 stainless steel laminate, polyurethane buttons, stainless steel hardware | |
| Dimensions | Valve Block (less tube fittings) | 2.5" x .88" x 1.25" (6.35 x 2.24 x 3.18 cm) |
| Button Valve Fittings | .63" x .63" x 1.0" (1.60 x 1.60 x 2.54 cm) | |
| Kick Plate (1740 & 1750 Series) | 8.0"w x 3.42"h x 1.14"d (20.32 x 8.64 x 2.90 cm) | |
| Floor Foot Pedal (1760 Series) | 7.1"w x 3.0"h x 1.1"d (18 x 7.6 x 2.8 cm) | |
| Euro (1770 Series) | 1.19"w x 4.92"h x 1.37"d (3.0 x 12.5 x 3.5 cm) | |
| Floor Activators (1780 Series) | 5.65" diameter disc (14.35 cm) |